Other Positive Displacement Pumps

Gear Pumps

ROTOMACTM Gear Pumps: We have a complete range of gear pumps, which fall under the category of Positive displacement pumps.

THE PRINCIPLE

Liquid enters the suction port between the rotor and idler teeth. The Liquid travels through the pump between the teeth of the “gear-within-a-gear” principle. The crescent shape divides the liquid and acts as a seal between the suction and discharge ports. The pump head is now nearly flooded, just prior to forcing the liquid out of the discharge port. Intermeshing gears of the idler and rotor form locked pockets for the liquid which assures volume control. Rotor and idler teeth mesh completely to form a seal equidistant from the discharge and suction ports. This seal forces the liquid out of the discharge port.

Sailent Features

  • Self Priming Pumps
  • Non-Pulsating Flow for clear fluids.
  • Suitable to handle Viscous Clear liquids at temperatures upto 200 Deg C
  • A variety of material options available to suit corrosive media as well.

Technical Specifications

  • Capacity : Upto 45 M3/Hr
  • Pressure : Upto 10 Kg/Cm2
  • Viscosity : Upto 30,000 Cst.

APPLICATIONS

INDUSTRIES FUILS HANDLED
Brewery and distillers FURNACE OIL
Cattle feed MINERAL OIL
Chemical and process EDIBLE OIL
Cosmetics and toiletries PETROLEUM GELLY
Edible oil PAINTS & VARNISHES
Effluent treatment SOLVENTS
Fertilizer CHEMICALS
Man-made fibres ACIDS
Marine ALKALIS
Oil exploration HOT SYRUPS
Paint and Varnish
Paper pulp and cellulose
Petrochemical and Refinery
Printing Ink
Sewage and Waste Water treatment
Soap and detergent
Starch
Sugar

Sanitary Lobe Pumps

ROTOMACTM Rotory Lobe Pumps

THE PRINCIPLE

The Principle of Operation of our Rotary Lobe Pumps are Two Synchornized Rotors (Lobes) rotating against each other build chambers towards the Casing of the Pump. At the suction side, the fluid enters the chambers and during rotation, the fluid is displaced in the direction of the volume flow in to the Discharge side.

SAILENT FEATURES

  • Pass medium solids
  • No metal-to-metal contact
  • Superior CIP/SIP capabilities
  • Long term dry run (with lubrication to seals)
  • Non-pulsating discharge

TECHNICAL SPECIFICATIONS

  • Capacity : Upto 50 M3/Hr.
  • Pressure : UpTo 10 Kg/Cm2
  • Viscosity : Upto 3,00,000 Cst

APPLICATIONS

Food and cosmetic products capable of being pumped by lobe rotor pumps.
Alcohol
Apple purée
Apricots
Baby food
Batter
Beans
Beer
Beetroot
Biscuit Cream
Blackcurrants
Brine
Broth
Butter fat
Caramel
Castor Oil
Cat food
Cheese curd
Cheese whey
Cherries
Chicken paste
Chili con carne
Chocolate
Chutney
Cockles
Coconut oil
Cod oil
Coffee liquor
Cordials
Corn oil
Corn syrup
Cottage cheese
Cotton seed oil
Cranberry juice
Cream
Cream cheese
Custard
Dog food
Dough
Eggs – whole
Egg yolk
Essences
Evaporated milk
Fish
Flavorings
Fondants
Fruit juice
Fruit pulp
Fruit – whole
Fruit yogurt
Gelatin
Gherkins
Glucose
Glycerin
Gooseberries
Gravy
Hand cream
Honey
Horseradish
Ice cream
Icings
Iodine ointment
Jams
Jelly
Ketchup
Lard
Liquid sugar
Lotions
Malt
Maple syrup
Margarine
Marmalade
Marshmallow
Marzipan
Mascara
Mayonnaise
Milk
Mincemeat
Molasses
Mousse
Mussels
Mustard
Nail polish
Nail varnish
Offal
Olive oil
Onions
Palm oil
Pastes
Peanut butter
Pectin
Perfumes
Piccalilli
Pie fillings
Pizza toppings
Plasma
Potato salad
Preserves
Purées
Quinine
Rice pudding
Salad dressing
Shrimps
Soap
Solvents
Sorbitol syrup
Soup
Soya sauce
Spirits
Starches
Stews
Strawberries
Sugar
Syrup
Tapioca
Tea
Tomato ketchup
Tomato paste
Tomato purée
Toothpaste
Vaseline
Vegetables
Vinegar
Water
Wines
Wort
Yeast
Yogurt

Triple Screw

We offer an entire range High performance Triple-Screw Pumps. Capable of handling a variety of liquids , each with their unique properties such as viscosity, and also operating a high pressures, Triple screw Pumps finds its application in an array of industrial applications

PRICLIPLE

ROTOMACTM Triple screw pumps use a simple design with only three screw elements Driving(1) & Idlers(2) moving in very precise liners. The unique profile of the screws ensure the liquid to be tightly sealed between the threads, hence as the screws rotate, the liquid is conveyed from one end to the other. This pumping action is seamless and almost noise free.

The power rotor is connected directly to the the prime mover, and as it rotates, the idlers turn due to the action of the pumped liquid. This action is in effect, that of a piston moving continuously in one direction, producing a smooth uniform flow without pulsations.

As the idlers perform no work, no gears are required to transmit power between the screws. As radial forces on the idlers are taken up by the surrounding cylindrical surfaces, no other bearings are required. Axial forces on the screwset caused by the pressure differential between inlet and outlet, are balanced hydraulically within the pump.

Another unique feature being, screws are hydro-dynamically balanced due to film lubrication, hence no additional bearings are required. Only one ball bearing is used for the axial positioning of rotor and safer operation of mechanical seals. Such unique design and features has demonstrated excellent reliability .With continuous non- stop running for years with almost negligible maintenance required.

MATERIAL OF CONSTRUCTION

  • Casing : Cast Iron, Cast Steel, Cast Stainless Steel
  • Liner : Cast Iron, Cast Stainless Steel
  • Screws : Alloy Steel, Nitried Steel & Stainless Steel

TECHNICAL SPECIFICATIONS

  • Capacity : From 1 to 400 M3/Hr
  • Pressure : Up to 64 Kg/cm2
  • Viscosity : 1-1, 00,000 Centre stoke
  • Temperature: Up to 300 .C

SALIENT FEATURES

High reliability Insensitive to viscosities
Long Service Life Axial flow – No churning , Chewing or shearing
Negligible Maintenance High Pressure Capability
High efficiency Excellent suction capability
Self Priming Hydraulic balancing of forces eliminates need for any bearings
Smooth Pulsation Free Flow Fast, Easy replacement of Parts
Low Noise and Vibration A choice of shaft seals for every application
High Speed Capability Custom design fabricated pump and per API standards

Twin Screw

We offer High performance Twin-Screw Pumps , working upto very high capacities at very high pressures. Twin screw pumps finds its application in an array of industrial applications

PRICLIPLE

ROTOMACTM Twin Screw pumps are robust in design and capable of handling a variety of liquids with diverse operating parameters which generally cannot be handled by other Positive Displacement Pumps. The pump consists of a pair of profiled screws supported on anti-frictional bearings.

Torque is transmitted from the driving shaft onto the driven shaft by hardened and ground timing gears arranged in the gear box. The speeds of both the screws are therefore synchronized. Timing gears maintains a small clearance between the moving screws, which enables the pump to even run dry. Since there is NO contact between the moving screws there is absolutely NO wear and tear of internal parts of the pump which gives extremely high trouble free and maintenance free operation for years together.

As both the screws move in opposite direction, the screws are perfectly balanced. The internal velocities are very low enabling the pump to operate with very low NPSH even when operating at full motor speed. The seals are located at the suction side and therefore are always under suction pressure due to the typical flow of the liquid, enhancing the life of the seals. The liquid is virtually carried between the screws in a straight path and hence it is not subjected to Turbulence, Churning or Chewing.

TECHNICAL SPECIFICATIONS

  • Capacity  : Upto 1500 M3/Hr
  • Pressure  : Up to 50 Kg/cm2
  • Viscosity  : Upto 5, 00,000 Centre stoke
  • Temperature: Upto 300 Deg C

MATERIAL OF CONSTRUCTION

  • Casing  : Cast Iron, Cast Stainless Steel, Cast Steel
  • Liner   : Cast Iron, Cast Stainless Steel
  • Screws  : Alloy Steel, Nitrided Steel & Stainless Steel
  • Timing gears : EN 36 / EN 24

SALIENT FEATURES

High reliability Insensitive to viscosities
Long Service Life Axial flow – No churning , Chewing or shearing
Negligible Maintenance High Pressure Capability
High efficiency Extremely Low NPSHr
Self Priming Hydraulic balancing of forces eliminates need for any bearings
Smooth Pulsation Free flow Fast, Easy replacement of Parts
Low Noise and Vibration A choice of shaft seals for every application
High Speed Capability Custom design fabricated pump and per API standards

 

INDUSTRIES FUILS HANDLED
Petro-chemicals Fuel oil HSD
Refineries LSHS Kerosene oil
On shore and off shore exploration HPS Naphtha
Oil storage depots RFO Lubricating oil
Bunkering stations Crude oil Molasses
Power plants Vacuum residue Black liquor
Marine Wax Polymeric resins
Shipping Bitumen Lacquers
Sugar industries Mineral oil Cosmetic creams
Steel industries Turbine oil Detergents
Paper industries Hydraulic oil Soaps
Textile Industries LDO Glucose
  Viscose Jelly
  Asphalt Fats
  Palm oil